Sony LMD-2050W Manuel d'utilisateur télécharger pdf (Page 12)

Location and Function of Parts and Controls

k AUDIO L/R OUT connectors (phono jack)

Outputs the audio signal which is selected by the input

select button on the front panel.

When BKM-220D or BKM-243HS is not installed,

output the audio signal which is selected in INPUT

SELECT of the USER CONFIG menu (see page 29).

When BKM-220D or BKM-243HS is installed, output

the audio signal of the channel which is selected in

OPTION AUDIO SETTING of the USER CONFIG

menu (see page 29).

The audio signal from this connector is monitored on the

front speakers (see page 9).

l Loop-through output connectors

Outputs the signals input to the input connectors (5 to

9). Connect to the analog input (composite, Y/C,

analog component or analog RGB) of equipment,

according to the input signal.

m Optional input slot

An optional input adaptor can be installed according to

your system configuration (see page 16).

The left side slot is A and the right side slot B.

Press the A-1, A-2, B-1 or B-2 button to select the

signal.

n PARALLEL REMOTE connector (modular

connector, 8-pin)

Forms a parallel switch and controls the monitor

externally.

For details on the pin assignment and factory setting

function assigned to each pin, see page 33.

CAUTION

For safety, do not connect the connector for peripheral

device wiring that might have excessive voltage to this

port. Follow the instructions for this port.

o SERIAL REMOTE connector (RJ-45)

Connect to the network or Sony BKM-15R Monitor

Control Unit by using a 10BASE-T/100BASE-TX LAN

cable (shielded type, optional).

For details, refer to the Interface Manual for

Programmers (saved in the supplied CD-ROM,

Japanese and English only.)

CAUTION

• When an optional LAN cable is connected, use a

shield type cable to prevent miss-operation due to

noises.

• For safety, do not connect the connector for peripheral

device wiring that might have excessive voltage to this

port. Follow the instructions for this port.

• The connection speed may be affected by the network

system. This unit does not guarantee the

communication speed or quality of 10BASE-T/

100BASE-TX.

p SERIAL REMOTE RS-232C connector (D-sub

9-pin, female)

Connect to the RS-232C control connector on external

equipment connected to the monitor. The monitor can

be operated according to control commands sent from

external equipment connected to it.

For details on the pin assignment and factory setting

function assigned to each pin, see page 33.

For details, refer to the Interface Manual for

Programmers (saved in the supplied CD-ROM,

Japanese and English only.)

q DVI-D input connector (DVI-D)

Inputs DVI Rev.1.0 applicable digital RGB signal.

To view the signals of the SXGA and higher resolution

when the DVI input is selected, use the cable within 3 m

(118

/8 inches) in length.

r HD15 input connector (D-sub 15 pin, female)

Inputs an analog RGB video signal (0.7 Vp-p, positive

polarity) and sync signal.

The Plug & Play function corresponds to DDC2B.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 37 38

Commentaires sur ces manuels

Pas de commentaire

Sony LMD-2050W Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Téléviseurs et moniteurs Sony LMD-2050W