Sony LMD-2050W Manuel d'utilisateur télécharger pdf (Page 30)

Adjustment Using the Menus

30

KEY INHIBIT menu

Submenu Setting

PARALLEL REMOTE Selects the PARALLEL REMOTE

connector pins for which you want

to change the function.

You can assign various functions to

1 to 4 pins and 6 to 8 pins. The

following lists the functions you

can assign to the pins.

• – – – (“– – –”: No function is

assigned.)

•COMPOSITE

•Y/C

•RGB

• COMPONENT

•DVI

• HD15

• OPTION A-1

• OPTION A-2

• OPTION B-1

• OPTION B-2

• OVERSCAN

•FULL

• NORMAL

•NATIVE

•4:3

•16:9

•TALLY R

•TALLY G

• EXT SYNC

• BLUE ONLY

• MONO

•H/V DELAY

• 16:9 MARKER

• 15:9 MARKER

• 14:9 MARKER

• 13:9 MARKER

• 1.85:1 MARKER

• 2.35:1 MARKER

• 1.85:1 & 4:3 MARKER

•4:3 MARKER

• CENTER MARKER

• SAFE AREA 80 %

• SAFE AREA 85 %

• SAFE AREA 88 %

• SAFE AREA 90 %

• SAFE AREA 93 %

• MARKER MAT HALF

• MARKER MAT BLACK

Notes

• If you use the PARALLEL

REMOTE function, you need to

connect cables. For more details,

see page 33.

• Set MARKER ENABLE

(page 26) to ON to control the

aspect marker, center marker or

safe area marker.

SERIAL REMOTE

MONITOR

CONTROLLER

CONNECTION

Selects the mode to be used.

• OFF: SERIAL REMOTE does

not function.

• RS-232C: The monitor is

controlled by the command of

RS-232C.

• ETHERNET: The monitor is

controlled by the command of

Ethernet.

• BKM-15R: Sets BKM-15R.

Sets the monitor setting.

MONITOR ID: Sets the ID

of the monitor.

GROUP ID: Sets the group

ID of the monitor.

IP ADDRESS: Sets the IP

address.

SUBNET MASK: Sets the

subnet mask.

(255.255.255.000)

DEFAULT GATEWAY:

Sets the default gateway on

or off.

ADDRESS: Sets the default

gateway.

CANCEL: Selects to cancel

the setting.

CONFIRM: Selects to save

the setting.

Sets the address of the remote

controller.

IP ADDRESS: Sets the IP

address.

SUBNET MASK: Sets the

subnet mask.

(255.255.255.000)

DEFAULT GATEWAY:

Sets the default gateway on

or off.

ADDRESS: Sets the default

gateway.

CANCEL: Selects to cancel

the setting.

CONFIRM: Selects to save

the setting.

Sets the connection of the monitor

and the controller.

PEER TO PEER: for one

to one connection

LAN: for connection via a

network

Submenu Setting

KEY INHIBIT: xx

KEY INHIBIT

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Commentaires sur ces manuels

Pas de commentaire