Sony RM-AV2100B Manuel d'utilisateur Page 44
- Page / 76
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
44
2 Press the m key.
M: Transfer data
m: Receive data
3 Press the 1 key.
1: All data of the Commander
2: Data of a Component Select button
4 Press the ENTER key.
As the data is received, the
corresponding component name stays
lit. If the all data have been
successfully received, the backlight of
the display turns off.
Notes
•If the Commander is not ready for
receiving the data, press CLEAR key, then
EXECUTE key to clear the learned signal
on all or one of the Component Select
buttons.
•If “NG” appears during data transfer, go
back to Step 3 and continue the operation
or press COMMANDER OFF to stop the
operation. If you continue the operation,
you have to set the sending remote
commander again to send data.
To receive the data of a
Component Select button from
another remote commander
1~2 Perform Steps 1 and 2 on
pages 43 and 44.
3 Press the 2 key.
4 Press the Component Select
button to which want to assign
the data.
5 Press the ENTER key.
When the data have been received,
“TV” and “m” go off. If the data have
been successfully received, the
backlight of the display turns off.
Notes
•If the Commander is not ready for
receiving the data, press CLEAR key, then
EXECUTE key to clear the learned signal
on all or one of the Component Select
buttons.
•If “NG” appears during data transfer, go
back to Step 3 and continue the operation
or press COMMANDER OFF to stop the
operation. If you continue the operation,
you have to set the sending remote
commander again to send data.
Transferring Data between Remote
Commanders (continued)
- Integrated Remote 1
- Commander 1
- For the customers in the USA 2
- Owner’s Record 2
- NOTICE FOR THE CUSTOMERS IN 2
- THE U.S.A 2
- Features 3
- Table of Contents 4
- Using Other Functions 5
- Additional Information 5
- Appendix 5
- Installing the Batteries 6
- Location and Function 7
- Setting the Code for 8
- Preset Audio and Visual 8
- Components 8
- Note on the DVD and CBL/SAT 9
- Note on the DECK B/A button 9
- Checking if the code number 10
- 1 Press the corresponding 10
- 3 Aim the Commander at the 10
- 5 Press COMMANDER OFF 11
- Finding a component code 11
- Remote Commander 13
- Operating Your 13
- Components with the 13
- To control the volume 14
- 3 When you are done using the 14
- Notes on operating your 15
- Using Non-Preset 16
- Remote Control 16
- Operations 16
- 6 Press COMMANDER OFF 17
- 2 When the desired display 19
- After Step 2 (page 16), while 20
- Press COMMANDER OFF 20
- 1 While pressing COMMANDER 21
- 3 Press COMMANDER OFF 21
- Controlling the Volume 22
- Connected to an Audio 22
- Executing a Series of 23
- Commands 23
- 2 Press the Component Select 24
- Programming a series of 24
- CONTROL buttons 24
- 4 Repeat Steps 2 and 3 and 25
- Notes on System Control 27
- Select buttons 28
- Component 30
- Display for the 30
- SYSTEM CONTROL 30
- 1, 2, 3 buttons 30
- Adding an Extra 31
- Function to the 31
- Component Select 31
- Adding a command that is 32
- 1 Place the RM-AV2100 head to 33
- 2 While pressing COMMANDER 33
- 3 Press the desired Component 33
- Turning Off the Power 34
- Assigning Other 35
- Components to the 35
- 3 Press the ENTER key 36
- 4 •If the newly assigned 36
- Copying the settings of a 37
- Component Select button to 37
- Programming a 38
- Frequently Used Key 38
- Operation for SYSTEM 38
- CONTROL Buttons 38
- 1 Place the Commander head to 39
- 3 Press the SYSTEM CONTROL 39
- Notes on learning the signals 40
- Transferring Data 41
- Commanders 41
- To transfer the data of a 42
- Component Select button 42
- 7 Press the “ENTER” key 43
- Receiving the data 43
- To receive the data of a 44
- Component Select button from 44
- Selecting a Channel 45
- 4 Release the macro key (PIP 46
- Locking the Controls 47
- Protecting your 48
- Changing the Auto 49
- Power-Off Time of the 49
- Adjusting the Backlight 50
- Setting the Key-Touch 51
- Changing the Touch 52
- Key Display 52
- Specifications 54
- Precautions 54
- Maintenance 54
- Troubleshooting 55
- Troubleshooting (continued) 56
- Customer Support Information 57
- Table of Preset 58
- Functions 58
- VCR 1, 2, 3 59
- CBL (Cable box) 60
- VD (Video disc player) 60
- Continued 61
- Table of Preset Functions 62
- (continued) 62
- DECK B/A 64
- DSP (Digital Surround 65
- Processor) 65
- LCD Touch-Key Display Table 66
- (Video disc 68
- (cable box) 69
- (Digital 72
- Surround 72
- Full display 73
- Quick Reference of Operations 74
Produits connexes et manuels pour Télécommandes Sony RM-AV2100B
(2 pages)
(2 pages)
(1 pages)
(2 pages)
(104 pages)© 2020, manymanuals.fr. Tous droits réservés | 2.547 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels