Sony RM-AV2100B Manuel d'utilisateur télécharger pdf (Page 52)

52

Notes

•You can select only one of the display types

for all Component Select buttons.

If you change the display type to the basic-

function (“CHANGE 2”) display for a

Component Select button, the displays for all

other Component Select buttons are also

changed to the same type (“CHANGE 2”).

•The number of keys displayed on the full-

function display varies according to the

component codes preset for the Component

Select buttons. For components that have few

keys in the full-function display, the basic-

function display can be the same as the full

one. In this case, you cannot modify the

basic-function display (See “To display only

the desired keys.”).

•A key that has learned any signal is always

displayed both in the full- and basic-function

displays.

To display only the desired keys

You can set only the desired keys on the

basic-function display. It makes

operations easier, because only the keys

you will use are displayed.

Changing the Touch-

Key Display

Each Component Select button has two

types of touch-key displays: the full-

function display and the basic-function

display. On the basic-function display,

only the keys that are used for basic

operations are displayed.

You can modify the basic-function

display by setting only the desired keys

on it (See “To display only the desired

keys.”).

To change the display type

1 Press the CHANGE key for any

Component Select key.

Each time you press the CHANGE

key, the display type changes.

“CHANGE 1” appears when the full-

function display is selected.

“CHANGE 2” appears when the

basic-function display is selected.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 75 76

Commentaires sur ces manuels

Pas de commentaire