Sony RM-AV2100B Manuel d'utilisateur télécharger pdf (Page 55)

Troubleshooting

If you have problems setting up or using the Remote Commander, first check the

batteries (page 6), then check the items below.

Remedy

•Go closer to the component. The maximum operating distance is

approximately 32.8 ft. (10 m).

•Check that you are aiming the Commander directly at the compoent,

and that there are no obstructions between the Commander and the

component.

•Power on the components first, if necessary.

•Make sure you have pressed the correct Component Select button. In

case of CBL/SAT, DVD or DECK B/A, make sure the desired

component is displayed.

•Check that the component has infrared remote capability. For example,

if your component didn’t come with a remote commander, it probably

isn’t capable of being controlled by a remote commander.

•You have assigned a different component to the Component Select

button. Check the component assigned to that button and the

component code.

•If your visual components are connected to an audio system, make sure

you’ve set up the Commander as described in “Controlling the Volume

of Visual Components Connected to an Audio System” (page 22).

•You have assigned another component to the TV or AMP button (page

35). In this case, the volume cannot be controlled when you select a

component other than TV or AMP.

•Set the component code correctly. If the code that is listed first for your

component doesn’t work, try all the codes for your component in the

order in which they are listed in the supplied “Component Code

Numbers”.

•Some features may not be preset. If some or all of the keys do not

function correctly even after you have set the component codes, then

use the learning function to program the remote control signals for the

component (page 16).

•The component may be operated with a code number that is not listed

in the “Component Code Numbers”. See “Finding a component code

with the Search function” (page 11) and try setting a code number

again.

•When you teach signals of an interactive signal exchange system remote

control unit (supplied with some of Sony’s receivers and amplifiers) to

the Commander, the response signal of the main unit may interfere with

the learning of the Commander. In such a case, move to a place where

the signals will not reach the main unit (e.g. other rooms, etc.).

•Make sure that the Remote Commander has learned the correct signals.

If not, see “For accurate learning” (page 20) and try the learning

procedure again (page 16).

Symptom

You cannot operate the

components.

You cannot control the

volume.

You cannot operate the

components even after

setting the component

code numbers.

The Commander fails to

learn the remote control

signals.

You cannot operate a

component even after

you programmed the

remote control signals

with the “learning”

function.

Continued

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

Sony RM-AV2100B Manuel d'utilisateur Page 55

Commentaires sur ces manuels

Produits connexes et manuels pour Télécommandes Sony RM-AV2100B