Sony NAS-S55HDE Manuel d'utilisateur télécharger pdf (Page 90)

NAS-S55HDE.GB.3-277-228-11(1)

90

GB

To check the server settings

When a client cannot connect to the unit, check

the unit’s server settings.

1

Enter the Settings menu and select [Server

setting].

2

When [Server function] is set to [Stop],

select [Start] from the pull-down menu.

To change the server name

Select [Server name] and enter the new name

in the text input display.

To disable automatic connection by

clients

When [Auto permit to connect] is set to

[Execute], audio data in the unit may be

played by a third party. To disable automatic

connection by clients, set this parameter to

[Not execute].

3

Select [Close].

To set the connection status of a

client

Access to the unit can be allowed or disallowed

for specic clients.

1

Enter the Settings menu and select [Server

setting].

2

Select [Manual setting].

3

Select the client and select [Permit] or

[Reject].

Repeat this step to set other clients.

4

Select [Close].

To register a client manually

When the unit is unable to recognize a client

automatically, you can register the client

manually.

For details on the MAC address, refer to the

operating manual of the client.

1

Enter the Settings menu and select [Server

setting].

2

Select [Manual setting].

A list of connectable clients appears.

3

Select [Add device].

4

Select [MAC address], enter the address,

and then press ENTER.

e MAC address should consist of 12

characters (0 to 9 and A to F).

To change a client’s name

Select [Device name] and enter the new name.

5

Select [Add].

6

Select [Close].

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 134 135

Commentaires sur ces manuels

Pas de commentaire