Sony SAT-A4 Manuel d'utilisateur télécharger pdf (Page 71)

Setting Up the Remote Control (SAT-A4 Only)

The Set Up Remote screens let you set up the Digital Satellite Receiver

to accept IR (infrared) or RF (radio frequency) signals from the remote

control and to change the RF security code for the Digital Satellite

Receiver.

You can also use this screen to display a list of codes you can use to

program the remote control to operate other components, such as TVs

and cable boxes.

Selecting IR/RF Transmission

(SAT-A4 Only)

In addition to having IR remote control capability, your DirecTV

System includes an RF feature, which enables the remote control to

operate the Digital Satellite Receiver even if the receiver is located in

another room or is placed behind a cabinet door. In other words, with

the RF feature, the remote control does not require a direct line-of-sight

to the front panel of the Digital Satellite Receiver.

Note

You must set up the RF antenna to take advantage of the RF feature. See

"Setting up the RF Antenna (SAT-A4 Only)" on page 19 for details.

The Digital Satellite Receiver is shipped with IR transmission enabled

and RF transmission disabled. To use the RF feature, you must change

the factory setting (IR ONLY) to the RF setting (RF ONLY).

To select IR or RF transmission:

1 Select REMOTE CONTROL from the Setup Menu.

2 Select REMOTE SIGNAL and select a transmission type (IR or RF).

SET UP REMOTE

iraiwii

RF SECURITY CODE

REMOTE CODES

REMOTE SIGNAL

Select IR or RF

transmission for the

Digital Satellite Receiver.

IR ONLY

RF ONLY

CANCEL

IDENTIFY

HELP

3 Select OK to save your selections and return to the Setup Menu.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 95 96

Pas de commentaire

Sony SAT-A4 Manuel d'utilisateur Page 71