Sony MEX-BT4150U Manuel d'utilisateur télécharger pdf (Page 38)

38

Wireless Communication

Communication System:

Bluetooth Standard version 2.1 + EDR

Output:

Bluetooth Standard Power Class 2

(Max. +4 dBm)

Maximum communication range:

Line of sight approx. 10 m (33 ft)*

1

Frequency band:

2.4 GHz band (2.4000 – 2.4835 GHz)

Modulation method: FHSS

Compatible Bluetooth Profiles*

2

:

A2DP (Advanced Audio Distribution Profile)

1.2

AVRCP (Audio Video Remote Control Profile)

1.3

HFP (Handsfree Profile) 1.5

PBAP (Phone Book Access Profile)

SPP (Serial Port Profile)

*1 The actual range will vary depending on

factors such as obstacles between devices,

magnetic fields around a microwave oven,

static electricity, reception sensitivity, antenna

(aerial)’s performance, operating system,

software application, etc.

*2 Bluetooth standard profiles indicate the

purpose of Bluetooth communication

between devices.

Power amplifier section

Output: Speaker outputs

Speaker impedance: 4 – 8 ohms

Maximum power output: 52 W × 4 (at 4 ohms)

General

Outputs:

Audio outputs terminal (front, rear, sub)

Power antenna (aerial)/Power amplifier control

terminal (REM OUT)

Inputs:

Remote controller input terminal

Antenna (aerial) input terminal

MIC input terminal

AUX input jack (stereo mini jack)

USB port

Power requirements: 12 V DC car battery

(negative ground (earth))

Dimensions: Approx. 178 × 50 × 177 mm

(7

1

/8 × 2 × 7 in) (w/h/d)

Mounting dimensions: Approx. 182 × 53 × 160 mm

(7

1

/4 × 2

1

/8 × 6

5

/16 in) (w/h/d)

Mass: Approx. 1.2 kg (2 lb 11 oz)

Supplied accessories:

Remote commander: RM-X231

Microphone

Parts for installation and connections (1 set)

Optional accessories/equipment:

USB connection cable for iPod: RC-100IP

Your dealer may not handle some of the above

listed accessories. Please ask the dealer for

detailed information.

Design and specifications are subject to change

without notice.

Troubleshooting

The following checklist will help you remedy

problems you may encounter with your unit.

Before going through the checklist below,

check the connection and operating

procedures.

For details on using the fuse and removing the

unit from the dashboard, refer to the

installation/connections manual supplied with

this unit.

If the problem is not solved, visit the support

site (page 43).

General

No power is being supplied to the unit.

 Check the connection or fuse.

 If the unit is turned off and the display

disappears, the unit cannot be operated with

the remote commander.

–Turn on the unit.

The power antenna (aerial) does not extend.

 The power antenna (aerial) does not have a

relay box.

No sound.

 The ATT function is activated.

 The position of the fader control “FADER” is

not set for a 2-speaker system.

No beep sound.

 The beep sound is canceled (page 31).

 An optional power amplifier is connected and

you are not using the built-in amplifier.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 127 128

Commentaires sur ces manuels

Pas de commentaire