Sony MEX-BT4150U Manuel d'utilisateur télécharger pdf (Page 32)

32

*1 Does not appear when “SET F/R POS” is set to

“OFF.”

*2 Does not appear when the tuner is selected.

*3 When “SW DIREC” is set to “OFF.”

*4 When “RBE MODE” is set to “OFF.”

*5 When the AUX is selected.

*6 When Bluetooth audio source is activated.

LOUDNESS (Dynamic Loudness)

Reinforces bass and treble for clear

sound at low volume levels: “ON,”

“OFF.”

ALO (Automatic Level Optimizer)

Adjust the playback volume level of all

playback sources to the optimum level:

“ON,” “OFF.”

RB ENH*

3

(Rear Bass Enhancer)

RBE MODE (Rear Bass Enhancer

Mode)

Selects the rear bass enhancer mode: “1,”

“2,” “3,” “OFF.”

LPF FREQ (Low Pass Filter Frequency)

Selects the subwoofer cut-off frequency:

“50Hz,” “60Hz,” “80Hz,” “100Hz,”

“120Hz.”

LPF SLOP (Low Pass Filter Slope)

Selects the LPF slope: “1,” “2,” “3.”

SW DIREC*

4

(Subwoofer Direct

Connection)

SW MODE (Subwoofer Mode)

Selects the subwoofer mode: “1,” “2,” “3,”

“OFF.”

SW PHASE (Subwoofer Phase)

Selects the subwoofer phase: “NORM,”

“REV.”

SW POS*

1

(Subwoofer Position)

(page 29)

Selects the subwoofer position: “NEAR,”

“NORMAL,” “FAR.”

LPF FREQ (Low Pass Filter Frequency)

Selects the subwoofer cut-off frequency:

“50Hz,” “60Hz,” “80Hz,” “100Hz,”

“120Hz.”

LPF SLOP (Low Pass Filter Slope)

Selects the LPF slope: “1,” “2,” “3.”

S.WOOFER (Subwoofer)

SW LEVEL (Subwoofer Level)

Adjusts the subwoofer volume level:

“+10 dB” – “0 dB” – “–10 dB.”

(“ATT” is displayed at the lowest

setting.)

SW PHASE (Subwoofer Phase)

Selects the subwoofer phase: “NORM,”

“REV.”

SW POS*

1

(Subwoofer Position)

Selects the subwoofer position: “NEAR,”

“NORMAL,” “FAR.”

LPF FREQ (Low Pass Filter Frequency)

Selects the subwoofer cut-off frequency:

“50Hz,” “60Hz,” “80Hz,” “100Hz,”

“120Hz.”

LPF SLOP (Low Pass Filter Slope)

Selects the LPF slope: “1,” “2,” “3.”

HPF (High Pass Filter)

HPF FREQ (High Pass Filter Frequency)

Selects the front/rear speaker cut-off

frequency: “OFF,” “50Hz,” “60Hz,”

“80Hz,” “100Hz,” “120Hz.”

HPF SLOP (High Pass Filter Slope)

Selects the HPF slope (effective only

when HPF FREQ is set to other than

“OFF”): “1,” “2,” “3.”

AUX VOL*

5

(AUX Volume Level)

Adjusts the volume level for each

connected auxiliary equipment:

“+18 dB” – “0 dB” – “–8 dB.”

This setting negates the need to adjust

the volume level between sources.

BTA VOL*

6

(Bluetooth Audio Volume

Level) (page 26)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 127 128

Commentaires sur ces manuels

Pas de commentaire